Reducing bumper contact noise.

The very latest news and updates for the iRobot Roomba robotic vacuum, the Scooba Robotic Washer and the Dirt Dog workshop sweeper. All discussion and troubleshooting questions go here.

Reducing bumper contact noise.

Postby leonicholson » April 13th, 2018, 12:35 pm

Curious. Has anyone tried reducing the contact noise when my 595 Roomba collides with an object? I use external rubber bumper strips, but could felt pads be placed internally to buffer the plastic on plastic noise?
leonicholson
Robot Groupie
 
Posts: 55
Joined: November 3rd, 2017, 5:25 pm

Re: Reducing bumper contact noise.

Postby vic7767 » April 13th, 2018, 1:08 pm

Normally the Light Touch sensors inside the center of the front bumper will slow down the Roomba prior to encountering an object. It the object is thin or a dark color then full speed will not slow prior to impact since the Light Touch sensor will not detect the object. Attempting to install quieting felt pads inside the bumper may limit the bumper sensor arm travel and prevent the sensor from operating. Careful measurements may be necessary and may not work. The mod you want to perform has not been posted on the forum yet, you will become a trailblazer.
Roomba and Neato Mods, come visit: http://www.vic7767.com/

http://www.Robot-Doc.com/
User avatar
vic7767
Robot Master
 
Posts: 14558
Joined: January 14th, 2006, 8:31 pm
Location: Haughton Louisiana - USA

Re: Reducing bumper contact noise.

Postby leonicholson » April 13th, 2018, 1:27 pm

I have to install a new charging jack, so may take the opportunity.

Mine usually slows, but only for "head on" objects.
leonicholson
Robot Groupie
 
Posts: 55
Joined: November 3rd, 2017, 5:25 pm

Re: Reducing bumper contact noise.

Postby vic7767 » April 13th, 2018, 4:03 pm

leonicholson wrote:Mine usually slows, but only for "head on" objects.
While you have your Roomba apart check for dust buildup on those Light Touch sensors. Good luck with your mod.
Roomba and Neato Mods, come visit: http://www.vic7767.com/

http://www.Robot-Doc.com/
User avatar
vic7767
Robot Master
 
Posts: 14558
Joined: January 14th, 2006, 8:31 pm
Location: Haughton Louisiana - USA

Re: Reducing bumper contact noise.

Postby leonicholson » April 16th, 2018, 12:11 pm

IMG_20180416_105501.jpg
I've started with a simple, non-invasive first step. I added two thin velcro tape pieces between the bumper and the unit. It is somewhat quieter on impact, without some of the sharp plastic on plastic noise.
leonicholson
Robot Groupie
 
Posts: 55
Joined: November 3rd, 2017, 5:25 pm

Re: Reducing bumper contact noise.

Postby vic7767 » April 16th, 2018, 1:01 pm

:cheers:
Roomba and Neato Mods, come visit: http://www.vic7767.com/

http://www.Robot-Doc.com/
User avatar
vic7767
Robot Master
 
Posts: 14558
Joined: January 14th, 2006, 8:31 pm
Location: Haughton Louisiana - USA


Return to iRobot Roomba and Scooba Chat

Who is online

Users browsing this forum: KeldBroe, someoneclever, teokakav and 309 guests