Neato Botvac Connected LEDs are flashin white, but no boot

News and information about the Neato XV-11 Robotic Vacuum. All discussion and troubleshooting questions go here.

Neato Botvac Connected LEDs are flashin white, but no boot

Postby lenny2k » August 20th, 2017, 10:27 am

I got some problem with my neato botvac connected 905-0249, i changed the sidebrush motor and from then the roboter wont power up.
The LEDs are white, after a short time they dim and then they go off. That goes all in a loop. No LCD output.
Sometimes (when the usb is connected, but still sometimes then) the LCD is going white and the start sound is played for 1/10 of a second. then everthing repeats. Still whith them leds in white :(

Befor, everthing worked great (expect the sidebrush :D).

So, do i need a new pcb? Is there any other option? C34 maybe? I read thats on some robots this cap is responsible for startproblems.

I tried several hardresets (both ways, right bumper switch and home, home für 15 sec) and put the botbot on his station to charge the battery.

any help welcome :)##

thanks a lot

lenny
lenny2k
 
Posts: 1
Joined: August 20th, 2017, 10:04 am

Re: Neato Botvac Connected LEDs are flashin white, but no bo

Postby Medtech » August 23rd, 2017, 4:18 am

It is necessary to connect the entire periphery to the board, the display too.
Thank you GOOGLE translator for the freedom of communication.
User avatar
Medtech
Robot Addict
 
Posts: 113
Joined: October 17th, 2014, 3:12 pm
Location: Moscow Russia


Return to Neato Robotics

Who is online

Users browsing this forum: amaterasu, Aniseedvan, chefkeith, Dibs, lanchez, Snokia, someoneclever, vic7767 and 350 guests