Neato D85

News and information about the Neato XV-11 Robotic Vacuum. All discussion and troubleshooting questions go here.

Neato D85

Postby lesli050 » May 10th, 2018, 11:08 pm

I need some help trouble shooting my Neato D85. Awhile back it stopped working. It would move away from the dock, spin up the lidar, vacuum and brushed and after 3-4 seconds beep and turn all of them off for a second. It would try this 3 times and not give any error message. I replaced the battery with no help. I took it apart and replaced the lidar with one from a working XV using these instructions ... lidar.html.

I'm still getting the same reading from Neato Control when I run GetLDSScan


I can see the Lidar spinning and it appears to be at an appropriate rpm. Anybody got any ideas what I need to do next? Any help would be appreciated. I can run other scans or give other data if somebody lets me know what they need to see. Thanks!
Posts: 1
Joined: May 10th, 2018, 11:01 pm

Re: Neato D85

Postby Chrislettn » March 26th, 2019, 11:55 am

Hello Lesli050,

I unfortunately have the same problem like you. Did you already found a solution for this problem?
Hope you can help me with this case.

Thanks in advance!

Posts: 1
Joined: March 26th, 2019, 11:52 am

Return to Neato Robotics

Who is online

Users browsing this forum: ASTMedic, babakonda, BCCISProf, BrettS, bytemaster0, im1kissfan, Itinerans, johnnyh, lanchez, Mekerz86, ps0001, raidencmc, rob111gb, someoneclever, sondejmarek, Spary, Superdog and 413 guests