Neato D6 Pairing

News and information about the Neato XV-11 Robotic Vacuum. All discussion and troubleshooting questions go here.

Neato D6 Pairing

Postby sillysuction » July 10th, 2019, 2:50 pm

Hey Folks,

The initial install of the D6 went ok, however, I changed the WIFI ssid and the issues started to occur. I went to pair with the device and it's no longer allowing me to connect to it's personal wifi. I reset by doing the right bumper, and pressing the start button. No luck

Went through the process to do a software reset as well, no luck. What's the key to clearing the device? I can't understand for the life of me as to why it's acting up. Any thoughts?
sillysuction
 
Posts: 1
Joined: July 10th, 2019, 2:43 pm

Re: Neato D6 Pairing

Postby JEfromCanada » July 10th, 2019, 7:42 pm

While I can't answer your question, why don't you just put the SSID back the way it was? Or is it too late for that?
Current robots:
Roomba Discovery 4210 (R.I.P. - Freecycled)
Roomba 560 (retired)
Neato XV-11 SW version 3.1.17844, LDS version 2.6.15295, with Pet Brush and Vic's filter (sold)
Neato Botvac 80 SW version 1.1.97, LDS version 2.6.15295, Board SW version 22753
JEfromCanada
Robot Addict
 
Posts: 676
Joined: November 13th, 2007, 5:16 pm
Location: Canada


Return to Neato Robotics

Who is online

Users browsing this forum: johnnyh, kersian, lanchez, someoneclever and 366 guests