D7 Manual Clean Mode

News and information about the Neato XV-11 Robotic Vacuum. All discussion and troubleshooting questions go here.

D7 Manual Clean Mode

Postby Thestregis » July 10th, 2019, 3:20 pm

Has anyone had difficulty using the manual clean mode on the D7? I have no issue using the app to run the various cleaning cycles and edit the maps. Yet, when I try to use the manual clean mode, the app says it cannot connect to the robot. I’m wondering if I’m doing something wrong or the manual clean mode is just buggy.
Posts: 2
Joined: July 7th, 2019, 10:47 am

Re: D7 Manual Clean Mode

Postby voicegy » July 14th, 2019, 5:46 pm

I would say it's occasionally buggy. The couple of times that manual mode failed me, I turned off the robot (hard shut down using the front button) and turned it back on again after about a minute, that usually 'cured' it.
User avatar
Robot Groupie
Posts: 62
Joined: August 8th, 2011, 10:12 pm
Location: San Diego, CA USA

Return to Neato Robotics

Who is online

Users browsing this forum: KeldBroe, Per L and 116 guests