New software for braava m6 is out 2.8.2

News and information about the iRobot Braava - formerly the Evolution Mint Robotic Cleaner. All discussion and troubleshooting questions go here.

New software for braava m6 is out 2.8.2

Postby Transammatt » June 20th, 2019, 9:00 am

Software 2.8.2
So no notes on there site yet.It only ran one time maybe better navigation when cleaning? Now default spay is set to the lowest setting.
What do you guys see changed?
Matt
Transammatt
 
Posts: 40
Joined: February 25th, 2017, 9:47 am

Re: New software for braava m6 is out 2.8.2

Postby Transammatt » June 20th, 2019, 11:58 pm

So the software moved the default amount of water spray down to the lowest setting. The default was the highest setting. The other thing I noticed is after it’s done cleaning it took the long way home instead of driving back over the clean floor this is a great improvement to minimize wheel Prints on your clean floor.
Transammatt
 
Posts: 40
Joined: February 25th, 2017, 9:47 am

Re: New software for braava m6 is out 2.8.2

Postby Botty » June 21st, 2019, 3:01 am

how are you finding it in general? noticeable improvement over the old braavas?
Botty
Robot Addict
 
Posts: 260
Joined: August 27th, 2018, 9:53 am

Re: New software for braava m6 is out 2.8.2

Postby Transammatt » June 21st, 2019, 10:39 am

Ok so that’s a hard one. From what I’m hearing if you have very shiny hardwoods and lots of light coming inside, you will see wheel marks and some haze. If you have more of a normal floor Lighterwoods not as shiny. I think you’ll love this robot navigate and does pretty good work. Without the navigation being a factor my 380t cleaned much better without all the bells and whistle’ if you have more of a normal floor Lighterwoods not as shiny. I think you’ll love this robot navigate and does pretty good work. Without the navigation being a factor my braava380t cleaned much better without all the bells and whistle‘s .hope that helps?
Last edited by Transammatt on June 21st, 2019, 3:27 pm, edited 1 time in total.
Transammatt
 
Posts: 40
Joined: February 25th, 2017, 9:47 am

Re: New software for braava m6 is out 2.8.2

Postby Botty » June 21st, 2019, 10:43 am

Transammatt wrote:my three ATT


forgive me, but what is this?
Botty
Robot Addict
 
Posts: 260
Joined: August 27th, 2018, 9:53 am

Re: New software for braava m6 is out 2.8.2

Postby Transammatt » June 21st, 2019, 3:28 pm

Sorry I fixed it.
Transammatt
 
Posts: 40
Joined: February 25th, 2017, 9:47 am


Return to iRobot Braava - Evolution Robotics

Who is online

Users browsing this forum: dboston55, symbol, waorb and 205 guests