Unzip, install and run Roomba status.
Go to the Menu/Settings Window and set the proper com port and baudrate (115200,n,8,1) and click serial port.
Connect to the roomba by clicking on the Connect button.
Click on the Start Button
Now you can enter the schedule commands in the text box to the left of the send button. Enter the proper commands and schedule data seperated by commas.
I don't have a 500 and have not downloaded a schedule. Hopefully this post will get you most of the way there.
vic7767 wrote:When you first start Roomba Status, before doing anything else, move your mouse curser up to the left hand top of the display and select "Menu" , then "settings", when that opens you will be able to define your com port and parameters "115200,N,8,1",as well as whether you are using a cable or Rootooth. Once you've defined that information then select "OK". At that point you can then select "Connect" from the bottom left of the main screen.
Users browsing this forum: No registered users and 340 guests