Threshold ramps for robot vacuums

Inside the Roomba and Scooba and more, Cool mods, Repair and Upgrades - including the all new iRobot Create Kit. Let's void that warranty baby!

Threshold ramps for robot vacuums

Postby glnc222 » June 15th, 2019, 5:31 pm

For doorway thresholds too high for small robots, often limited to 1.5cm height, rubber ramps made for wheel chair access might be used. Some of these are only 1 in. high, 8 in. deep, and could be cut off at lower heights. Narrower pieces might need to be fastened to the floor with double stick tape etc.
Example at Amazon
Rather expensive materials for their size, probably reflecting medical market conditions (wheel chairs).
Beveled wood molding is made for window framing, in building supply.
Another material is electrical cord covers for floors, which might be cut in two, but light weight and needs fastening down.
Robot Master
Posts: 4968
Joined: January 23rd, 2012, 9:19 pm
Location: North Carolina, U.S.

Return to Robotic Hacking

Who is online

Users browsing this forum: BrettS, dboston55, im1kissfan, lanchez, leonicholson, Miles267, Per L and 458 guests