Vorwerk VR220 won´t charge

News and information about the Neato XV-11 Robotic Vacuum. All discussion and troubleshooting questions go here.

Vorwerk VR220 won´t charge

Postby stivi83it » February 21st, 2019, 3:15 pm

Hello. Sorry for my strange sentence structure, I translate with Google. what could be the problem if a Vorwerk VR220 does not load? the station is new, the battery can be charged easily in another VR300. It is displayed after changing the full battery but then 0%.

GetVersion
Component,Major,Minor,Build,Aux
BaseID,0.0,0.0,0,0,
Beehive URL, beehive.ksecosys.com,
Blower Software Version,0,0,,
BlowerType,2,BLOWER_VORWERK_REV1,
Bootloader Version,48199,,
BrushMotorResistorPowerRating,750,,
BrushMotorResistorResistance,50,,
BrushMotorType,1,BRUSH_MOTOR_ORIG,
BrushSpeed,1800,,
BrushSpeedEco,1450,,
ChassisRev,1,,
DropSensorType,1,DROP_SENSOR_ORIG,
LCD Panel,0,0,0,
LDS CPU,F2802x/c001,,
LDS Serial,OPS13718AA-0076277,,
LDS Software,V2.6.15295,0000000000,
LDSMotorType,2,LDS_MOTOR_MABUCHI,
Locale,1,LOCALE_USA,
MagSensorType,1,MAG_SENSOR_ORIG,
MainBoard Serial Number,xxx,xxx,
MainBoard Version,6,,
Model,VR300,905-0444,
NTP URL, pool.ntp.org,
Nucleo URL, nucleo.ksecosys.com,
QAState,QA_STATE_APPROVED
Serial Number,xxx,xxx,xxx
SideBrushPower,700,,
SideBrushType,2,SIDE_BRUSH_PRESENT,
SmartBatt Authorization,0
SmartBatt Data Version,1536
SmartBatt Device Chemistry,LION1
SmartBatt Device Name,VR220?
SmartBatt Manufacturer Name,Panasonic
SmartBatt Mfg Year/Month/Day,2018,4,26
SmartBatt Serial Number,184
SmartBatt Software Version,256
Software Git SHA,xxx
Software,4,2,1,118,0
Time Local,Fri Feb 22 10:47:23 2019
Time UTC,Fri Feb 22 09:47:23 2019
UI Board Hardware,0,0,
UI Board Software,0,0,
UI Name,NONE
UI Version,NONE
Ultrasonic Sensor Hardware,1,,
Ultrasonic Sensor Mode,3,US_ON,
Ultrasonic Sensor Software,13,,
VacuumPwr,75,,
VacuumPwrEco,50,,
WallSensorType,1,WALL_SENSOR_ORIG,
WheelPodType,1,WHEEL_POD_ORIG,


I´ve seen that the SmartBatt Authorization,0 displayed with NeatoControl
Last edited by stivi83it on February 22nd, 2019, 8:10 am, edited 1 time in total.
stivi83it
 
Posts: 9
Joined: February 21st, 2019, 3:10 pm

Re: Vorwerk VR300 won´t charge

Postby stivi83it » February 22nd, 2019, 8:07 am

GetCharge
Label,Value
FuelPercent,0
BatteryOverTemp,0
ChargingActive,1
ChargingEnabled,1
ConfidentOnFuel,0
OnReservedFuel,0
EmptyFuel,1
BatteryFailure,0
ExtPwrPresent,1
ThermistorPresent,1
BattTempCAvg,0
VBattV,0.00
VExtV,18.80
Charger_mAH,0
Discharge_mAH,0
stivi83it
 
Posts: 9
Joined: February 21st, 2019, 3:10 pm

Re: Vorwerk VR220 won´t charge

Postby stivi83it » February 22nd, 2019, 8:10 am

re you aware of anything that you have to unlock the battery? In a VR300, it works.
stivi83it
 
Posts: 9
Joined: February 21st, 2019, 3:10 pm


Return to Neato Robotics

Who is online

Users browsing this forum: anjosva, jdong and 333 guests

cron