Under the hood of the iRobot S9

The very latest news and updates for the iRobot Roomba robotic vacuum, the Scooba Robotic Washer and the Dirt Dog workshop sweeper. All discussion and troubleshooting questions go here.

Under the hood of the iRobot S9

Postby vic7767 » June 11th, 2019, 8:30 pm

Just a quick peek under the S9 Roomba reveals a 3300 mAH Li-ion pack, continuation of the modular design of the two drive wheels as well as the brush deck. However the side brush motor is now integrated into the brush deck module.

Also discovered a micro-USB port but so far have been unable to observe any serial port data activity.

IMG_0652.JPG
Attachments
IMG_0655.JPG
Roomba and Neato Mods, come visit: http://www.vic7767.com/
User avatar
vic7767
Robot Master
 
Posts: 14939
Joined: January 14th, 2006, 8:31 pm
Location: Haughton Louisiana - USA

Re: Under the hood of the iRobot S9

Postby BoxerBoi76 » Yesterday, 4:59 pm

Looks like no room for a larger battery like the i7.

Hopefully third party battery manufacturers can pack more mAH in the same size.
BoxerBoi76
 
Posts: 13
Joined: June 9th, 2019, 5:06 pm

Re: Under the hood of the iRobot S9

Postby ps0001 » Today, 8:00 am

I love that they finally put the caster in the back. If they could only figure out a way to automatically clean the rollers of long hair/pet fur, this thing would be unstoppable. I think some of the Samsung robots purport to do this, but I don't know how effective their mechanism is.
ps0001
Robot Addict
 
Posts: 183
Joined: December 5th, 2017, 4:25 pm

Re: Under the hood of the iRobot S9

Postby RTC » Today, 8:49 am

ps0001 wrote:I love that they finally put the caster in the back.

I think the only reason the caster is there is because when the extractors were moved from the center to the front, there was no room left at the front for the caster. :) All it does anyway is act as a speedometer pickup for the machine, so it doesn't really matter where it is.
Technologist (i.e. one who studies technologies)

From the earliest "sticks and stones" technologies of our prehuman ancestors to the latest "high tech" technologies of today, I like studying it all!
RTC
Robot Addict
 
Posts: 141
Joined: August 23rd, 2018, 7:23 pm
Location: Lost someplace in Montana, USA

Re: Under the hood of the iRobot S9

Postby rotorwash » Today, 9:05 am

I love that the caster is in the rear. Mine hasn't needed to be cleaned yet while the ones in the front need to be cleaned daily. Not sure about the speedometer pick up
rotorwash
Robot Groupie
 
Posts: 83
Joined: September 16th, 2018, 2:10 pm

Re: Under the hood of the iRobot S9

Postby Julian » Today, 1:17 pm

rotorwash wrote:I love that the caster is in the rear. Mine hasn't needed to be cleaned yet while the ones in the front need to be cleaned daily. Not sure about the speedometer pick up

Yes. I've had problems with fluff gathering in the front castor on both of my very old Roomba 560s. I don't have to clean them every run but if I leave it for long enough the whole robot goes crazy because the fluff builds up enough to block the optical sensor that is trying to take the speedometer readings, it doesn't seem to quite know how fast it is moving and starts stopping and starting and moving very jerkily plus making strange course changes that I don't usually see it make. My house is almost all carpeted which is probably harder on the caster in terms of fluff intrusion. I would have thought that having the rollers at the front cleaning a patch of floor before the caster gets dragged over it would significantly reduce the rate of fluff intrusion. Good to hear that that seems to be how it is working out in practice.

Re Vic's initial post, I'm very glad to see that iRobot has to a large extent retained the modular design principles. Definitely a good thing in my view. My old Roombas have been a joy to work on of the few occasions when that's been necessary.

- Julian
Julian
Robot Addict
 
Posts: 122
Joined: May 29th, 2009, 7:23 pm

Re: Under the hood of the iRobot S9

Postby RTC » Today, 1:37 pm

rotorwash wrote:Not sure about the speedometer pick up

That is why it is half white and half black. An optical sensor converts the cycles of light/dark to digital pulses that the Roomba uses to measure speed & distance moved, just like the pickup on your car's axle is used by the speedometer & odometer on the dashboard to measure speed & distance moved. Older cars used a geared pickup and mechanical analog coupling, most modern cars use a magnetic pickup that generates a series of digital pulses (not much different than the pulses generated by the Roomba's optical sensor at the caster).
Technologist (i.e. one who studies technologies)

From the earliest "sticks and stones" technologies of our prehuman ancestors to the latest "high tech" technologies of today, I like studying it all!
RTC
Robot Addict
 
Posts: 141
Joined: August 23rd, 2018, 7:23 pm
Location: Lost someplace in Montana, USA

Re: Under the hood of the iRobot S9

Postby vic7767 » Today, 3:30 pm

Both the i7and S9 castor wheels are of a single color (Black) they do not provide the tachometer function that we are used to on the earlier model R3s and most R2s.
Roomba and Neato Mods, come visit: http://www.vic7767.com/
User avatar
vic7767
Robot Master
 
Posts: 14939
Joined: January 14th, 2006, 8:31 pm
Location: Haughton Louisiana - USA

Re: Under the hood of the iRobot S9

Postby RTC » Today, 4:45 pm

vic7767 wrote:Both the i7and S9 castor wheels are of a single color (Black)

Interesting! Its probably just a physical support and they estimate speed off the main wheels or something (they still need the info)... Or perhaps the new caster is only all black in visible light and light/dark in IR (which might be more tolerant of dirt on the wheel).
Technologist (i.e. one who studies technologies)

From the earliest "sticks and stones" technologies of our prehuman ancestors to the latest "high tech" technologies of today, I like studying it all!
RTC
Robot Addict
 
Posts: 141
Joined: August 23rd, 2018, 7:23 pm
Location: Lost someplace in Montana, USA

Re: Under the hood of the iRobot S9

Postby jdong » 24 minutes ago

RTC wrote:
vic7767 wrote:Both the i7and S9 castor wheels are of a single color (Black)

Interesting! Its probably just a physical support and they estimate speed off the main wheels or something (they still need the info)... Or perhaps the new caster is only all black in visible light and light/dark in IR (which might be more tolerant of dirt on the wheel).


They seem to estimate speed based off an optical mouse like IR sensor now that points at the floor. Though the 980 had color coded caster wheels there was no optical sensor in there.


Sent from my iPhone using Tapatalk Pro
jdong
Robot Addict
 
Posts: 320
Joined: April 10th, 2015, 11:24 pm


Return to iRobot Roomba and Scooba Chat

Who is online

Users browsing this forum: Atena, BrettS, fufu, im1kissfan, jdong, johnnyh, rob111gb, someoneclever, sondejmarek, StefanKrupop, TechGuy, tre, vicdeng and 389 guests

cron