Samsung Tango (Korea)

News and information about the Samsung Navibot, Tango, Furot and VC series Robotic Vacuums. All discussion and troubleshooting questions go here.
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

I can't understand , why they say "pre-motor filter - foam" and "exhaust - HEPA11"? Is there any pre-motor filter? I saw that there is only pre-motor HEPA filter... http://www.samsung.com/ca/consumer/home ... fullspec=F
User avatar
djos
Robot Addict
Posts: 1219
Joined: November 30th, 2009, 6:34 am
Location: Melbourne, Australia

Re: Samsung Tango

Post by djos »

I wonder why the Canadian models drop the 2nd beater brush? :?:
Current Robot's:
Neato BotVac 80 w/ Li-NMC Battery , 2x XV11 w/ Li-NMC Battery
iRobot Roomba 561 w/ NiMh Battery & Aerovac Bin, Scooba 380 w/ Li-NMC Battery

Previous Robots:
iRobot Roomba 562PE w/ Aerovac Bin & Sealed-bearing CHM
Evolution Mint 4200
Bernd
Posts: 31
Joined: February 13th, 2010, 7:51 am

Re: Samsung Tango

Post by Bernd »

I didnt saw any pre motor filter on my Tango, but maybe there is such a filter inboard, because
the hepa filter isn't very effectiv or let me say the (nonexistent) sealing of the hepa filter isn't effectiv.
The Tango Hepa filter hasn't a sealing, it just stuck and wobbles into a slit of plastic.
Above the hepa filter i can see much dust, which must be going through the filter or through
non existing "sealing" of the filter to the motor and then into the room again.

The older VC-RE72 has a folded hepa filter with much more surface area and with a good rubber sealing.
Above this filter i couldn't see dust going into the case.

Bernd
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

Bernd wrote:I didnt saw any pre motor filter on my Tango, but maybe there is such a filter inboard, because
the hepa filter isn't very effectiv or let me say the (nonexistent) sealing of the hepa filter isn't effectiv.
The Tango Hepa filter hasn't a sealing, it just stuck and wobbles into a slit of plastic.
Above the hepa filter i can see much dust, which must be going through the filter or through
non existing "sealing" of the filter to the motor and then into the room again.

The older VC-RE72 has a folded hepa filter with much more surface area and with a good rubber sealing.
Above this filter i couldn't see dust going into the case.

Bernd
Thx Bernd :)
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

NEW model from Tango line available on e-bay: Samsung VC-RA50VK:

http://cgi.ebay.pl/2010-NEW-SAMSUNG-VC- ... 27b02d51ea

Look like european SR8845 and maybe it is the same as (colour, hard buttons), but it is for korean market.
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

Did anybody of the owners try to disassemble their robot? I wonder how is made the vacuum fan...:)
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

New 2010 Samsung tango models:

VC-RL84V
VC-RL84VC
VC-RL52V


Main difference between this new model and previous (VC-RA84V, VC-RA84VC and VC-RA52V) is noise reduction (new one only 55dB, old 62dB).
ycl90
Posts: 15
Joined: February 17th, 2010, 12:59 am

Re: Samsung Tango

Post by ycl90 »

I'm eyeing samsung vc-rl84v! Any reviews about it?? When was it released?
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

ycl90 wrote:I'm eyeing samsung vc-rl84v! Any reviews about it?? When was it released?
It was released recently, I don't know exactly when (few days, weeks maybe).
Also, it is available on ebay:

VC-RL84V
VC-RL84VC
VC-RL52V
ycl90
Posts: 15
Joined: February 17th, 2010, 12:59 am

Re: Samsung Tango

Post by ycl90 »

It seems that there's a new colour in korean market : vc-rl84vr (mirror red)
Specs wise, all same. I wonder the difference besides the noise level.

Oh ya, the charging voltage for korea are 220V 60HZ. But the country i live is uses 240V 50HZ. Do i need any transformer if i plan to use it in my country? (import from korea) Or it will just work fine?
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

ycl90 wrote:It seems that there's a new colour in korean market : vc-rl84vr (mirror red)
Specs wise, all same. I wonder the difference besides the noise level.
Yes, it is interesting. Maybe in the near future I will post here some videos. I was looking at korean web services for videos but found nothing :(
Oh ya, the charging voltage for korea are 220V 60HZ. But the country i live is uses 240V 50HZ. Do i need any transformer if i plan to use it in my country? (import from korea) Or it will just work fine?
Sorry for the late answer. It should work without any problems. One of users of this forum - arief, used Samsung VC-RE70V in Australia (240V/50Hz) and he tells that it was working good.
Last edited by piokrza on April 28th, 2010, 1:38 am, edited 1 time in total.
ycl90
Posts: 15
Joined: February 17th, 2010, 12:59 am

Re: Samsung Tango

Post by ycl90 »

piokrza wrote: Yes, it is interesting. Maybe in the near future I will post here some videos. I was looking at korean web services for videos but found nothing :(
Thanks for the reply. I don't think samsung korea has officially announced the new model. I dont see any news from the korean websites regarding the new models.

But it's already selling in the market.

Too bad i cant read korean language. I've been through some websites comparing roomba 577(it's the roomba sold there with 2 light houses), tango vc-ra84v and roboking.

and too bad my girlfriend doesnt share the same interest as me! @@ (she could read koreans)
ycl90
Posts: 15
Joined: February 17th, 2010, 12:59 am

Re: Samsung Tango

Post by ycl90 »

Oh.. There's some korean reviews stating roomba has a better efficiency than tango and roboking :
http://ceo2002.tistory.com/424

I used google translate and barely understand them.
But i know 1st - roomba 2nd - roboking and 3rd - tango.

Check out the condition of the test though
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

ycl90 wrote: Thanks for the reply. I don't think samsung korea has officially announced the new model. I dont see any news from the korean websites regarding the new models.

But it's already selling in the market.
Here new models are listed: click

And here is description of VC-RL84V click
Too bad i cant read korean language. I've been through some websites comparing roomba 577(it's the roomba sold there with 2 light houses), tango vc-ra84v and roboking.

and too bad my girlfriend doesnt share the same interest as me! @@ (she could read koreans)
I can't read too :) but I use google translator :)
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

ycl90 wrote:Oh.. There's some korean reviews stating roomba has a better efficiency than tango and roboking :
http://ceo2002.tistory.com/424

I used google translate and barely understand them.
But i know 1st - roomba 2nd - roboking and 3rd - tango.

Check out the condition of the test though

This is the reason why Navibot has Max Mode - for better cleaning very dirty rooms/houses.
ycl90
Posts: 15
Joined: February 17th, 2010, 12:59 am

Re: Samsung Tango

Post by ycl90 »

Thanks for the links. Which one should i go for?

I'm also worried about the the availability of accessories. Irobot's one is definitely easy to find.

Tango and roboking.. i dont know. If the battery fails, I've no idea where to find replacement :P Not to say the brush and filters as well.

But on the other size, i'm eager on trying new technologies from samsung ;D
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

ycl90 wrote:Thanks for the links. Which one should i go for?

I'm also worried about the the availability of accessories. Irobot's one is definitely easy to find.

Tango and roboking.. i dont know. If the battery fails, I've no idea where to find replacement :P Not to say the brush and filters as well.

But on the other size, i'm eager on trying new technologies from samsung ;D
And this is the problem - spare parts :think: some of these are available on ebay - like for example, for VC-RE70V, but how long it will be - I don't know.
ycl90
Posts: 15
Joined: February 17th, 2010, 12:59 am

Re: Samsung Tango

Post by ycl90 »

My friend(in korea) reads some review saying the new tango(rl series) is much quieter!!
Don't know how true until video comes out! :D
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

ycl90 wrote:My friend(in korea) reads some review saying the new tango(rl series) is much quieter!!
Don't know how true until video comes out! :D
Yes, it is 7dB difference between VC-RA and VC-RL models (first 62dB, second 55dB).
piokrza
Robot Master
Posts: 3521
Joined: May 18th, 2009, 8:17 am
Location: Poland
Contact:

Re: Samsung Tango

Post by piokrza »

[video]http://www.youtube.com/watch?v=1rqGVROyyOE[/video]
[video]http://www.youtube.com/watch?v=lQudT3OcmQI&feature=related[/video]
[video]http://www.youtube.com/watch?v=Fr2gEbsO5IY[/video]
Post Reply